Grain Storage

GSI Grain Storage Bins

GSI Logo

Farm Grain Storage System
2.66" Corrugated Narrow Series Farm Bins

Grain Systems "Narrow" series farm bins and silos are the original Grain Systems grain bin/silo line. An unstiffened series, this line is a popular choice throughout the United States. With 32"(813 mm) tall sheets it is easy to construct and is produced in three series, the NSL series for general storage and drying, the NHL series for more aggressive drying (and in certain cases the use of multi-auger stirring devices), and the NRL series for use with grain recirculating systems.
4.00" Corrugated Wide Series Farm Bins

4.00" Corrugated Wide Series Farm Bins


The GSI "Wide" series farm bins and silos are an unstiffened grain bin series with 44" (1118 mm) tall sheets and is preferred by some customers, especially in smaller diameters. This option also allows you to match up with the appearance and peak heights of other wide corrugation bins you may already have in place. The "Wide" series is produced in three series, the WSL series for general storage and drying, the WHL series for more aggressive drying and in certain cases the use of multi-auger stirring devices, and the WRL series for use with grain recirculating systems.

 

Farm-Com Grain Storage Bins

Farm-Commercial Grain Storage Bins

GSI has combined the sound engineering principals used on large commercial stiffened grain tanks to on-farm stiffened grain bins. The GSI Farm-Com series is a 4" corrugation, externally stiffened bin available in greater capacities than the unstiffened NS series or unstiffened WS series. These bins and silos have proven a popular choice for many intensive use situations such as over cone pits, with recirculating systems, etc. This option also allows you to match up with the peak heights of other wide corrugation bins you may already have in place.

 

Commercial Storage Bins/Silos

Commercial Grain Storage Bins/Silos

A world leader in steel corrugated storage bin manufacturing, Grain Systems offers the strongest and heaviest gauge storage tanks in the industry with capacities exceeding 710,000 bushel (20,000 MT). Our tank sidewall is roll-formed at the GSI plant using 8 gauge, and now 5 and 6 gauge, prime high tensile steel up to 65,000 PSI (450 MPa). The heavier 5 gauge sidewall allows us to provide taller tanks with our advanced design, compared to other manufacturers who provide 8 gauge as their maximum thickness.

 

 

Commercial Grain Hopper Tanks

Commercial Hopper Tanks

GSI offers two series of commercial hopper tanks , the NCHT series with a strong 2.66" sidewall corrugation, and the shorter FCHT series with a wider 4.00" sidewall corrugation. The NCHT series encompasses a full range of diameters ( from 15' to 36' ), capacities ( up to 53,659 bushels (1513 MT)), and hopper slopes (40, 45, and 60 degree) to meet virutally any hopper storage requirements. The FCHT series is available in a 45 degree hopper slope and is designed to cover a more specific "intermediate" range of capacities providing the strength and reliability of a stiffened tank and the cost advantage of a series designed for a specific limited size/capacity range. All sidewall is roll-formed at the GSI plant for consistency from commercial coated galvanized steel for increased durability.

 

 

Bulk Feed Tanks

Bulk Feed Tanks

Bulk Feed Tanks (BFT) are a very popular way of storing feed due to its ease of installation, lower expansion cost and convenient hopper unloading. Several of these tanks can be installed to store a variety of grains and the sealed roof and body design helps protect grain/feed from moisture damage. GSI Bulk Feed Tanks are available in 6', 7', 9', 12', and 15' diameters and range in capacities up to 77 metric tons (3182 bushels).

 

 

Wet Holding Hopper Tanks

Wet Holding Hopper Tanks

Wet holding bins need to be able to support slightly heavier loads than typical bulk feed tanks. They are available in 7', 9', 12', 15', 18', and 21' diameters and can be used for temporary storage for properly dried grain. GSI grain hopper tanks (GHT) are designed to hold 45 lbs. per cubic foot, with total bin capacities exceeding 150 metric tons (or over 6000 bushels). See GHT specifications for more information.

 

 

Top Dry Systems

Top Dry Systems

Over the years, universities, and farmers alike have repeatedly proven that "in-bin" drying is one of the most efficient methods of drying grain. Top Dry goes one step further by integrating features that allow filling, drying and dumping operations to be run automatically for extreme efficiency. And, because Top Dry is also a storage bin, crops can be stored on site, then sold at a later date for potentially better returns.

 

 

 

Copyright ©2006 Harder Ag Products